Operating instructions

11
B. Racking a Field-Rackable Array
7. Install one clip nut each on the right
and left front columns (see Fig. 26).
(Use the black arrow on the template
as a guide.)
Fig. 26. Installing enclosure clip nuts in HP Computer Cabinet
8. Place the array on the rails and slide
it all the way to the rear (see
Fig. 27).
WARNING! An empty array
weighs in excess of 60 pounds
(27.2 kg). To avoid serious injury, it
is recommended that two people
lift the array into the rack.
9. Tighten two M5 screws through the
array front mounting ears.
Fig. 27. Sliding the array into HP Computer Cabinet