Operating instructions

B. Racking a Field-Rackable Array

3. The array and rail kit take 4 units of

space: 3 units for the array, and 1

unit for the rails (see Fig. 23). Using

the template provided, locate the

required units of space on the four

rack columns.

Fig. 23. Locating units of space in HP Computer Cabinet

4. Install one clip nut on the inside of

each column (see Fig. 24).

Fig. 24. Installing rail clip nuts in HP Computer Cabinet

5. On the ends of both rails, insert the

rail tab (see Fig. 25, A) into the

column hole (B).

6. Secure the rails with four M5

screws.

Fig. 25. Installing rails in HP Computer Cabinet