User guide

Using the Simplified OSD

Compaq Server Console Switch User Guide 5-13

COMPAQ CONFIDENTIAL

Writer: Amy L. Laffitte File Name: f-ch5 Using the Simplified OSD

Codename: Hoosier Part Number: 141555-003 Last Saved On: 8/21/02 3:12 PM

3. Enter the port number of the first computer to be included in the scan.

If the computers are listed by name, enter the first few letters of the name of the

first computer to be included in the scan.

4. Move the highlight to the Sec column, and enter the number of seconds this

computer is to be selected before switching to the next computer in the sequence.

5. Move the highlight to the next line and repeat steps 3 and 4 for each of the

remaining computers.

6. Press the Enter key to save the settings and exit the menu; the new scan pattern

replaces the standard or previous custom scan pattern.

Press the F10 key to restore default settings.

Press the Esc key to exit the menu without saving the settings.

Removing a Computer from the Scan List

To remove a computer from the scan list:

1. In the Scan Pattern Setup screen, enter the port number of the computer to be

removed.

If the computers are listed by name, enter the first few letters of the name of the

computer.

2. Move the highlight to the Sec column.