User guide

Using the Simplified OSD
5-10 Compaq Server Console Switch User Guide
COMPAQ CONFIDENTIAL
Writer: Amy L. Laffitte File Name: f-ch5 Using the Simplified OSD
Codename: Hoosier Part Number: 141555-003 Last Saved On: 9/25/02 3:36 PM
Changing Status Flag Attributes
The status flag indicates the name or port number of the currently selected computer.
The user can choose to display the status flag at all times, for a few seconds after
switching, or not at all. The user can also change the color of the status flag and its
location on the screen.
To change status flag attributes:
1. In the Advanced Menus screen, move the highlight to the Setup menu.
2. Highlight Flag and press the Enter key; the Flag Configuration screen is
displayed.
FLAG CONFIGURATION
Enabled PORTS ON
Row 14
Column 1
Color 2
Text 0
Mode OPAQUE
Figure 5-6: Flag Configuration screen
3. Highlight the settings to change and use the + or – keys to adjust the values.
Table 5-2 describes each of the available menu attributes.
4. Press the Enter key to save the settings and exit the menu.
or
Press the F10 key to restore default settings.
or
Press the Esc key to exit the menu without saving the settings.