User guide

Using the OSD
Compaq Server Console Switch User Guide 4-21
COMPAQ CONFIDENTIAL
Writer: Amy L. Laffitte File Name: e-ch4 Using the OSD
Codename: Hoosier Part Number: 141555-003 Last Saved On: 8/22/02 12:19 PM
To set a custom scan pattern:
1. Enter the name or port number of the computer in the Name and Port boxes for
the computer to be included in the scan.
2. In the Sec column, enter the number of seconds, from 1 to 255, that this computer
will be selected before switching to the next computer in the sequence.
3. Repeat for each of the remaining computers to be included in the scan.
4. Click OK. The new scan pattern replaces the standard or previous custom scan
pattern.
To start the scan mode, select Scan Enabled from the Commands screen.
To cancel scan mode, deselect Scan Enabled from the Commands screen.
To remove a computer from the scan list:
1. Click the computer to be removed from the scan list.
2. Press the Delete key.
or
Press the Shift + Delete keys to delete the current computer and all computers
below it.
3. Click OK.