Manualshelf

User guide

ManualsBrandsCompaq ManualsSwitchSwitch 6
21222324252627282930
Hardware Installation
Compaq Server Console Switch User Guide 2-11
COMPAQ CONFIDENTIAL
Writer: Amy L. Laffitte File Name: c-ch2 Hardware Installation
Codename: Hoosier Part Number: 141555-03 Last Saved On: 8/26/02 3:33 PM
Standard 1U Installation
To install the console switch:
1. Attach the slide rail brackets to the console switch, using the two screws on each
side.
2. Use the template that was shipped with the component to mark the location of the
mounting hardware.
a. Push back the tabs (marked ) on the top of the template and place them in
the correct holes in the mounting rails.
b. Match up the hole pattern indicated on the sides of the template with the hole
pattern on the mounting rails.
c. Measuring from the top of the component immediately below the new
component, place the template against the front and rear of the rack frame to
mark the attachment points for the mounting rails and rear cage nuts.
Figure 2-13: Measuring with the rack template