Installation guide
6 Compaq StorageWorks Fibre Channel SAN Switch 16 Release Notes
Ethernet Link Mode
This is similar to the Telnet command “ifmodeset.” The parameters are auto,
10H, 100H, 100F where H=Half duplex and F=Full duplex.
Suppress Class F Traffic
Suppress Class F Traffic suppresses class F traffic for remote switch
configuration. The parameters are “0” for off and “1” for on.
Quick Soft Initialization
When Quick Soft Initialization is selected, the QuickLoop initialization
assumes some pre-configured loop conditions. Quick Soft Initialization is not
selected by default and should not be selected without consulting Compaq
technical support.
Licenses
Table 1 lists the licenses key translations. The display format follows this but
is hex, for example, 01B=27 decimal which translates into
Web+Zoning+QL+Fabric=1+2+8+16=27.
Table 1
License Key Translations
License Decimal Hex
WEB_LICENSE 1 1
ZONING_LICENSE 2 2
SES_LICENSE 4 4
QL_LICENSE 8 8
FABRIC_LICENSE 16 10
REMOTE_SWITCH 32 20
REMOTE_FABRIC 64 40
EXTEND_FABRIC 128 80
ENTRY_FARIC 256 100