Technical data

70 HP Surestore FC Switch 6164 Installation and Reference Guide
22.Provide the position number of the new switch to the existing FC 6164
group. The position number pertains to the position of the switch in the
chassis switch is on the far left, and switch 6 is on the far right.
a. Log by Telnet onto one of the switches that was not replaced.
b. Enter the following command:
sgroupSWReplace
c. Provide the requested information at each prompt:
–
Please Enter Group Name: [ ]
Enter the name of the
existing group. The name cannot be null or contain blank spaces,
and can be up to 32 characters in length.
–
Old WWN: [ ]
Enter (in quotes) the WWN of the switch that
was removed from the group.
–
New WWN: [ ]
Enter (in quotes) the WWN of the new switch.
–
Which switch would you like to replace? [ ]
Position WWN
1 10:00:00:60:69:10:2a:c0
2 10:00:00:60:69:10:4a:c1
3 10:00:00:60:69:10:2b:34
4 10:00:00:60:69:10:50:7a
5 10:00:00:60:69:10:4b:a7
6 10:00:00:60:69:10:29:8e
Please enter position number: (1..6) [0] 2
–
Enter new replace member by domain#? (yes,
y, no, n): [no] y
– Please enter domain ID of the replacement
switch: (1..239) [0] 9
Committing configuration...done.
The updated group information is communicated to all switches in
the group.