Technical data

57
4
MAINTENANCE PROCEDURES
Switch Replacement Procedure
Use this procedure to remove and replace any of the six switches in the FC
6164.
Note
For detailed information about any of the Fabric OS commands
referenced in this chapter, enter
help
plus the
[command name]at
the
Telnet prompt. For example, to display information about the
fabricShow
command, enter the following:
help fabricShow
The overall procedure of replacing a switch involves the following
secondary procedures, described on the indicated pages:
1. “Preparing to Remove the Switch From the FC 6164” on page 59
2. “Physically Uninstalling the Switch” on page 61
3. “Installing the New Switch in the Chassis” on page 63
4. “Configuring the New Switch” on page 64
5. “Adding the New Switch to the Integrated Fabric” on page 69