Technical data

44 HP Surestore FC Switch 6164 Installation and Reference Guide
12.Re-attach the rack-mount bracket adjustable plates:
a. From the front of the rack, slide the switch forward a small distance.
b. Insert one of the adjustable plates into one the stationary plates (see
Figure 16).
c. Insert the screws you removed in Step 6a through the slotted holes in
the stationary plate and into the second set of threaded holes in the
adjustable plate from the rack-mounting flange (see Figure 16). Do
not tighten the screws at this time.
d. Repeat Steps b and c for the rack-mount bracket on the opposite side
of the switch.
e. Move the switch forward in the rack as far as it can go. The amount
of movement is limited by the rack-mount bracket adjustable plates
contacting the rack uprights.
Figure 16. Re-attaching the Rack-Mount Bracket Adjustable Plates