Technical data

Installing and Configuring the FC 6164 41
8. Remove the two screws that attach the latch plate to the right side of the
switch at the front, and remove the latch plate (see Figure 14). Set the
latch plate and the screws aside for later use.
Note
The latch plate fits through a cutout in the rack-mounting flange
on the right side of the switch.
9. Remove the eight #10-32 Phillips screws that attach each of the
rack-mounting flanges to the sides of the switch at the front, and remove
the rack-mounting flanges (see Figure 14). Set the rack-mounting flanges
and the screws aside for later use.
Figure 14. Removing the Latch Plate and the Mounting Flanges
Rack-mounting
flange
Latch plate