Technical data

36 HP Surestore FC Switch 6164 Installation and Reference Guide
e. Orient the rail tray as shown in Figure 8, and insert it into the rack
from the front. The slots in the sides of the rail tray must slide over
the posts on the rear rail-tray brackets, and the posts on the rail tray’s
front mounting flanges must be inserted in the center holes of RU1.
f. Insert M5 torx screws through the top holes in both of the rail tray
mounting flanges. The screws pass through the holes in the rack
uprights and thread into the Tinnerman nuts you installed on the
uprights in Step 3c. Tighten the screws.
Figure 8. Inserting the Rail Tray in the Rack