Technical data

Installing and Configuring the FC 6164 31
Hardware Identification
Figure 4 contains drawings and descriptions of the hardware used when
installing the FC 6164 in an HP rack or a Compaq/Rittal rack. Use this key
to help identify the hardware specified in the installation procedure in this
chapter.
Figure 4. Hardware Key
M5 Torx screw with captive lock washer
#8-32 x .375-inch flat-head Phillips screw
M5 Tinnerman nut
#10-32 Tinnerman nut
1/4-20 x 1/2 inch Phillips screw and washer
#10-32 X 5/8-inch pan-head Phillips screw
Spacers for Compaq/Rittal racks
1/4-inch flat washer
M5 flat washer