Technical data

30 HP Surestore FC Switch 6164 Installation and Reference Guide
Note
A package containing two mounting rails may be included with the
switch. These rails are not used and can be discarded.
Table 7. Contents of the Shipping Carton(s)
ASwitch
B Plenum kit (4 rectangular sheets of Lexan with 6 adhesive strips
pre-attached) (HP P/N A7326-87903)
C Front bezel (HP P/N A7326-40001)
D Rail Tray kit (Rail tray, 2 brackets, 2 M5 Tinnerman nuts, 4 M5 Torx
screws) (HP P/N A6534-60016)
E Shim plates (2 ea. HP P/N A7326-87904)
F Rack Mount Bracket set (2 Rack-Mount brackets)
(HP P/N A7326-87901)
G Switch door (part of Accessory kit [HP P/N A7326-70001], which
also includes: Software CD, Documentation CD, and Serial cable)
H Miscellaneous hardware: (not shown) (HP P/N A7326-87905)
Note: The hardware in the Standard hardware package (unmarked plastic bag)
is required to install the switch in an HP rack. Some of the hardware in the
Standard hardware package and the hardware in the Compaq/Rittal hardware
package is required to install the switch in a Compaq/Rittal rack.
Standard hardware package
8 #8-32 x .375-inch (.3125) flat-head screws w/patchlock.
8 M5 Torx screws with lock washers
6 M5 Tinnerman nuts
4 1/4-20 x 1/2-inch Phillips pan-head screws with lock washers
Compaq/Rittal hardware package
6 #10-32 Tinnerman nuts
6 #10-32 x 5/8-inch Phillips pan-head screws with captive lock washers
6 Spacers
4 1/4-inch flat washers
4 M5 flat washers