Technical data

Installing and Configuring the FC 6164 27

Items Required

The following items must be available before you begin the installation

procedures:

• FC 6164

• 30” deep rack space, 14 rack units high and 19” wide

• Six Ethernet cables, one for each switch

• Six power outlets, one for each switch

• FC 6164 worksheet, provided in Appendix A, “FC 6164 Worksheet”

• Serial cable connected to the workstation, long enough to connect to

each of the switches in the chassis

• Workstation that has a terminal emulator application (such as

HyperTerminal)

• Six unused IP addresses

• Ethernet connection between the workstation and the FC 6164 (such as

through a hub)

• #2 Phillips screwdriver

• T20 Torx screwdriver

• Genie lift (to transport the switch) For information on the lift, see:

http://www.genielift.com/ml-series/ml-1-2.html

http://slick2.atl.hp.com/ceworld/siteservices/tools/genie/genielift_ordering.htm