Technical data

226 HP Surestore FC Switch 6164 Installation and Reference Guide
Multicast Transmission of data from a single source to a number of specified N_Ports.
See also Broadcast, Unicast.
Multimode Fibre-optic cabling specification allowing up to 500 meters between devices.
N_Port Node Port. Port that can attach to a fibre channel port. See also NL_Port,
Nx_Port.
NAA Network address authority. An identifier that indicates the format of a
network address.
Name server Service of storing names, addresses, and attributes for up to 15 minutes,
provided by a switch to other entities in fabric. Defined by fibre channel
standards, and existing at a well-known address. Also called Simple Name
Server, SNS, or directory service. See also FS.
NL_Port Node Loop Port. An N_Port that can use loop protocol. Used to connect
equipment ports to fabric in loop configuration through FL_Port. See also
N_Port, Nx_Port.
Node Fibre channel entity with one or more N_Ports or NL_Ports.
Node name Unique identifier for a node, communicated during login and port discovery.
Nonparticipating
mode
Mode in which L_Port is inactive in loop and cannot arbitrate or send frames,
but can retransmit received transmissions. Port enters mode if there are more
than 127 devices in loop, and an AL_PA cannot be acquired. See also
Participating mode.
Nx_Port Node port that can operate as either an N_Port or NL_Port.
Open Originator The L_Port that wins arbitration in an arbitrated loop and sends an OPN
ordered set to the destination port, then enters the Open state.
Open Recipient The L_Port that receives the OPN ordered set from the open originator, and
then enters the Open state.
Open State The state in which a port can establish a circuit with another port. A port must
be in the Open state before it can arbitrate.
OPN Open Primitive Signal. The protocol use by a port that has won arbitration
in an arbitrated loop to establish a circuit.