Technical data

Telnet Commands 209
snmpMibCapSet
Views and modifies options for configuring SNMP MIB and Trap
capability.
Synopsis snmpMibCapSet
Availability Administration
Description This command enables you to turn on or off certain MIBS and TRAPS and
enables you to turn on or off group information and SSN in SW trap
messages. This command first displays current settings and then prompts
you to change the values for each parameter.
• FA-MIB - Specifying yes means you can access FA-MIB variables with
an SNMP manager. The default value is yes.
• SW-TRAP - Specifying yes means the SNMP management application
can receive SW traps from the switch. The default value is yes.
• FA-TRAP - Specifying yes means the SNMP management application
can receive FA traps from the switch. The default value is yes.
• SW-EXTTRAP - Specifying yes means you can receive group
information such as Group Name, Group Type, and Member Position,
and SSN in the SW traps. The default value is no.
Operands None
Example swd55:admin> snmpMibCapSet
The SNMP Mib/Trap Capability has been set to support
FE-MIB SW-MIB FA-MIB SW-TRAP FA-TRAP
FA-MIB (yes, y, no, n): [yes]
SW-TRAP (yes, y, no, n): [yes]
FA-TRAP (yes, y, no, n): [yes]
SW-EXTTRAP (yes, y, no, n): [no]
no change