Technical data

Telnet Commands 207
switchStatusPolicyShow
Displays the policy parameters that determine the overall switch status.
Synopsis switchStatusPolicyShow
Availability All users
Description Use this command to view the current policy parameters set for the switch.
These policy parameters determine the number of failed or nonoperational
units allowed for each contributor before triggering a status change in the
switch.
The command prints the current parameters in a three-column table format.
The first column specifies the contributor; the second column specifies the
minimum number that contributes to the DOWN/FAILED status; the third
column specifies the minimum number that contributes to the
MARGINAL/WARNING status. The default values for the policy
parameters are as follows:
The policy parameters determine the number of failed or nonoperational
units for each contributor that trigger a status change in the switch. For
example, if the FaultyPorts DOWN parameter is set to 3, and 3 ports fail in
the switch, the status of the switch changes to DOWN.
Operands None
Contributor
Default Value for
DOWN
Default Value for
MARGINAL
FaultyPorts 2 1
MissingGBICs 0 0
PowerSupplies 2 1
Temperatures 2 1
Fans 2 1
PortStatus 0 0
sgroup ISLStatus 2 1