Technical data

204 HP Surestore FC Switch 6164 Installation and Reference Guide
switchStatusPolicySet
Sets the policy parameters that determine the overall switch status.
Synopsis switchStatusPolicySet
Availability Administration
Description Use this command to set the policy parameters for calculating the overall
status of the switch enclosure. The policy parameter values determine how
many failed or faulty units of each contributor are allowed before triggering
a status change in the switch from HEALTHY to MARGINAL or DOWN.
This command prints the current parameters in a three-column table format.
The first column specifies the contributor; the second column specifies the
minimum number that contributes to the DOWN/FAILED status; the third
column specifies the minimum number that contributes to the
MARGINAL/WARNING status. This command then prompts you to
change the values for each policy parameter. The default values for the
policy parameters are as follows:
Any single contributor can force the overall status of the switch to
MARGINAL or DOWN.
Contributor
Default Value for
DOWN
Default Value for
MARGINAL
FaultyPorts 2 1
MissingGBICs 0 0
PowerSupplies 2 1
Temperatures 2 1
Fans 2 1
PortStatus 0 0
sgroup ISLStatus 2 1