Technical data

202 HP Surestore FC Switch 6164 Installation and Reference Guide
sgroupSwReplace
Replaces a member of a switch group.
Synopsis sgroupSwReplace
[“sgName”, “oldWwn”, “newWwn”]
Availability Administration
Description This command replaces the member with oldWwn in group sgName with
the member with newWwn. The order of members within the member list
is not changed by this operation.
If any parameter is not specified, the session becomes an interactive session
and all parameters are prompted.
This command makes the same change to all switches in the specified
group, and executes on every switch in the group if each switch in the
group can perform the action.
Operands This command has the following operands:
sgName
Specify the switch group name (for example,
“NewGroup”) that contains the member you want to
replace. The switch group name must be enclosed in
quotation marks. This operand is optional.
oldWwn
Specify the WWN of a switch group member (for
example, “10:00:00:60:69:20:22:22”) that you want to
replace. The WWN must be enclosed in quotation
marks. This operand is optional.
newWwn
Specify the WWN of the new member (for example,
“10:00:00:60:69:20:55:55”). The WWN must be
enclosed in quotation marks. This operand is optional.