Technical data

198 HP Surestore FC Switch 6164 Installation and Reference Guide
sgroupSupportShow
Displays switch information for all switches within the specified group.
Synopsis sgroupSupportShow “sgroupName” [, “commandName”]
Availability All users
Description This command can display a range of debugging information for all
switches in a switch group. If no commandName is specified or all is
specified in place of a command name, all supported commands are
displayed for the switches within a switch group. If a single command is
specified, only the information for that command is displayed.
Operands This command has the following operands:
sgroupName
Specify the name of the switch group. This operand
must be enclosed in quotation marks. This operand is
required.
commandName
Specify the name of the command to be displayed for
the specified switch group. If no command is
specified, or all is specified, all supported commands
are executed against all switches within a switch
group. The following commands are supported in the
order that they are executed. These commands are not
case sensitive. This operand must be enclosed in
quotation marks, and is optional.