Technical data

Telnet Commands 187
Example The following example shows the results of islTopoShow on a
mis-configured switch. In a proper configuration, all switches have valid
domains and names, and each ports status is OK.
es_6:admin> islTopoShow
ISL data for type: S32_6_1, sgroup: My_group
idx domain expected wwn name
01 01 10:00:00:60:69:20:02:9f jr_1003
02 02 10:00:00:60:69:10:a0:4e es_6
03 -01 00:00:00:00:00:00:00:03 -UNKNOWN-
04 -01 00:00:00:00:00:00:00:04 -UNKNOWN-
05 -01 00:00:00:00:00:00:00:05 -UNKNOWN-
06 -01 00:00:00:00:00:00:00:06 -UNKNOWN-
Switch idx: 1 Domain: 1, wwn: 10:00:00:60:69:20:02:9f
isl port expected switch port actual switch port status
0 00 -> es_6 : 08 es_6 : 08 OK
1 01 -> es_6 : 09 es_6 : 09 OK
2 02 -> es_6 : 10 -UNKNOWN- :-01 No record
3 03 -> es_6 : 11 es_6 : 10 Wrong port
4 04 -> -UNKNOWN- : 08 -UNKNOWN- :-01 No record
5 05 -> -UNKNOWN- : 09 -UNKNOWN- :-01 No record
6 06 -> -UNKNOWN- : 10 -UNKNOWN- :-01 No record
7 07 -> -UNKNOWN- : 11 es_6 : 13 Wrong switch
8 08 -> -UNKNOWN- : 08 -UNKNOWN- :-01 No record