Technical data

155
Thresholds for the Remaining Classes
The Port, E-Port, F/FL, and F/FL Optical Port classes display the following
fields for each area (Link Loss, Sync Loss, Signal Loss, Protocol Error,
Invalid Words, Invalid CRCs, State Changes, RX Performance, and TX
Performance).
Watched
checkbox
Check or uncheck to specify whether you want this
area watched (not available for all areas).
The columns for the Power Supply and Current areas contain the following
item:
“Send alarms
when” box
Use this text box to specify whether you want to be
notified when the area is in the acceptable range
(OK) or is faulty (FAULTY).
Low text box Enter the lowest number of occurrences that are
acceptable.
High text box Enter the highest number of occurrences that are
acceptable.
Threshold Type
drop-down list
Select the type of threshold.
Time period drop-down
list
Select the time period you want applied to
frequency measurements.