Technical data

150 HP Surestore FC Switch 6164 Installation and Reference Guide
Following is a description of the fields in the Bypass dialog box:
Enable Dialog Box
You can use the Enable option to enable an AL_PA on the loop port that
was previously bypassed. To access this option, click Enable on the Loop
tab of Port Information View.
Following is a description of the fields in the Enable dialog box:
AL_PA to Bypass Specify the AL_PA number to bypass.
Do not bypass the last AL_PA on the loop, because
this puts it into a loopback state, which requires a
reboot to return it to an L-Port state.
Apply Click to bypass an AL_PA on the loop port (must be
a valid AL_PA).
Close Click to close the Bypass dialog box.
Figure 36. Enable Dialog Box
AL_PA to Enable Specify AL_PA to be enabled. Entering
oxff
enables
all AL_PAs in the loop.
Apply Click to enable the AL_PA (must be valid AL_PA).
Close Click to close Enable an AL_PA window.