Technical data

Using Fabric Manager 133
Switch Events View
Switch Events View displays a log of events for the selected switch.
To access Switch Events View:
1. Select Start >Programs > Fabric Manager > Fabric Manager.
The URL window displays.
2. Enter the switch name or IP address in the blank field.
Note
This switch is assumed to be the local domain.
WWN Unique numeric identifier for each switch; assigned by
manufacturer.
Domain ID Number that uniquely identifies the switch in a fabric.
Role Indicates the current role of the switch.
• Principal The principal switch as defined by
FC_SW protocol.
• Subordinate Enabled but not the principal switch.
• Disabled Disabled.
State Indicates the current state of the switch, which can be
online, offline, testing, or faulty.
Firmware Fabric OS version.
Serial # The serial number of the switch being viewed.
Ether IP Ethernet IP address.
Ether NM Ethernet netmask value.
FC IP Fibre channel IP address.
FC NM Fibre channel netmask value.
Gateway IP address of default gateway. Must be properly set to
access switch from other networks.