Technical data

Using Fabric Manager 123
Delete Qloop Click to delete the QuickLoop selected in the
QuickLoop Name field. Deleting a QuickLoop
automatically removes it from all aliases, zones, and
zone configurations, including the associated
AL_PAs.
Rename Qloop Click to edit the name of the QuickLoop selected in
the QuickLoop Name field. A dialog displays in
which you can edit the name of the QuickLoop.
Switch Selection
List
A list of the switches available to add to the
QuickLoop.
Add Member Click to add the switch selected in the Switch
Selection List to the QuickLoop Members list.
Remove Member Click to remove the selected member from the
[QuickLoop name] Members list.
[QuickLoop name]
Members
A list of the members of the QuickLoop currently
selected in the QuickLoop Name field. The name of
this list depends on the name of the selected
QuickLoop. If no QuickLoop is selected, the name
displays as “null Members.”
Apply Click to apply all changes made since Zone
Administration View was opened, including changes
made on other tabs in the view. Changes cannot be
cancelled after they are applied.
Cancel Click to cancel all changes since the changes were
last applied, and to exit Zone Administration.
Changes cannot be cancelled after they are applied.
Done Click to apply all changes made since Zone
Administration View was opened, and to exit Zone
Administration View.