Technical data

Using Fabric Manager 117
Zone Administration View
Zone Administration View provides access to all the zoning functions, and
can only be accessed using an administrative account. This view is not
updated when it is launched; if a switch or device is added or removed from
the network, it is necessary to save the changes and relaunch the Zone
Administration View for the changes to take effect. For more information
about using Zoning, see the Zoning User’s Guide.
To access Zone Administration View:
1. Select Start >Programs > Fabric Manager > Fabric Manager.
The URL window displays.
2. Enter the switch name or IP address in the blank field.
Note
This switch is assumed to be the local domain.
3. Press the Enter key to submit the address.
Fabric Manager launches, displaying the default view, Fabric View.
4. From Fabric View, click Zone Admin.
Zone Administration View displays (see Figure 26).
Following are the tabs provided in Zone Administration View and the pages
on which they are described:
• “Alias Tab” on page 118
• “Zone Tab” on page 120
• “QuickLoop Tab” on page 122
• “Config Tab” on page 124
Hard Address The hard address of the fabric port.
Member of Zones The zones to which this device belongs. This column
does not update when the table is refreshed. To view
updated zoning information, close and re-open the
Name Server Table.