QuickSpecs
Step 1 - Choose a Base EVA Model
Step 1 - Choose a Base EVA ModelStep 1 - Choose a Base EVA Model
Step 1 - Choose a Base EVA Model
CTO Factory integration part number (Required)
CTO Factory integration part number (Required)CTO Factory integration part number (Required)
CTO Factory integration part number (Required)
Step 2 - Choose a Rack - Base and Factory Integration Information
Step 2 - Choose a Rack - Base and Factory Integration InformationStep 2 - Choose a Rack - Base and Factory Integration Information
Step 2 - Choose a Rack - Base and Factory Integration Information
Factory Integration
Factory IntegrationFactory Integration
Factory Integration
Start your order by choosing a rack to house your EVA4000/6000 based on the HP
10000 G2 Series Rack.
NOTE:
NOTE:NOTE:
NOTE:
When choosing an EVA configuration, start with an EVA configuration "equal to"
or "closest but smaller" than the desired final configuration. Factory configuration rules
will not allow a unit to be built up past the starting point for another standard
configuration. (For example for an EVA6000 2C6D choose an EVA6000 2C4D plus 2
M5314B; not an EVA4000 2C1D plus 5 M5314B enclosures and FC Dual loop
switch.) Orders that do not follow these conventions will be unable to be processed.
CTO Factory integration part number (Required)
CTO Factory integration part number (Required)CTO Factory integration part number (Required)
CTO Factory integration part number (Required)
325584-888
Primary Configuration
Primary ConfigurationPrimary Configuration
Primary Configuration
Rules
RulesRules
Rules
Use of the Factory Integration part number is required for component integration. The
EVA4000/6000 will be configured into a 42U HP 10000 G2 Series Rack with the
appropriate PDU. If other products such as servers or back-up products are included in
the cab a different PDU will be added (if required) or can be chosen from a list of
appropriate offerings. HP 10000 G2 Series Rack must be purchased. Additional
EVA4000/6000 bundles and drive enclosures may be ordered for multiple subsystem
integration at the factory. Additional cabs are required to house configurations beyond
the U-space of the initial cabinet.
The EVA4000/6000 controller pair assembly is available for field installation. The
EVA4000/6000 controller pair assembly should be ordered for field installation. HP
Global Services will perform the on-site installation when an EVA4000/6000 controller
pair assembly is ordered.
The Rack System/E cabinets (choice of 41U, 33U and 25U heights) and 5642 (42U)
Rack Cabinet System are supported for field installation. These racks may be purchased
along with EVA component pieces for assembly in the field. The HP 5642 rack system is
an entry level rack with sufficient features for easy access and ease of use.
When calculating available U-space, assume that no space will be placed between the
mounted components.
Cabinets
CabinetsCabinets
Cabinets
NOTE:
NOTE:NOTE:
NOTE:
The number of subsystems varies and is determined by the interior U-space of
the cab.
HP Rack 10642 G2 Shock (42U)
AF002A
HP Rack 10642 G2 w/Extn Shock (42U)
AF004A
HP Rack 10642 G2 (no door) Shock (42U)
AF005A
HP Rack 10642 G2 w/Extn (no door) Shock (42U)
AF006A
HP Rack 10636 G2 Shock (36U)
AF012A
HP Rack 10636 G2 w/Extn Shock (36U)
AF014A
HP Rack 10636 G2 (no door) Shock (36U)
AF015A
HP Rack 10636 G2 w/Extn (no door) Shock (36U)
AF016A
http://h18004.www1.hp.com/products/servers/proliantstorage/racks/10000series.html
QuickSpecs
HP StorageWorks Enterprise Virtual Array Family
HP StorageWorks Enterprise Virtual Array FamilyHP StorageWorks Enterprise Virtual Array Family
HP StorageWorks Enterprise Virtual Array Family
Configuration Information and Configuration Rules
DA - 12408 North America — Version 2 — April 3, 2006
Page 22