Installation guide

Command View XP installation guide 43
Integrating Command View with other platforms
Integrating with HP OpenView Storage Area Manager
Command View and Storage Area Manager should not be installed on the same management station.
However, Storage Area Manager provides a way for users to launch a browser and access Command
View from a Storage Area Manager client GUI.
Also, host agents with compatible versions of each software product can coexist on the same host. For
more information, refer to ”Coexistence of Command View and Storage Area Manager host agents”
below.
Running Command View from a Storage Area Manager management station
1. Install Storage Area Manager. The HP OpenView Storage Area Manager installation guide provides
the information to accomplish this task.
2. For Storage Area Manager 3.0 or earlier, install the DPI patch on the Storage Area Manager platform
to integrate the disk arrays. To download the patch, go to
http://www.openview.com/products/dpi/index.html
. Installation instructions are provided with the
patch.
3. Refer to the Storage Area Manager documentation for further details on running Command View.
Coexistence of Command View and Storage Area Manager host agents
Only certain versions of the host agents from each software product can coexist on the same hosts.
Optional: Communicating with Storage Area Manager in an SSL environment
If you are using Command View in SSL mode, refer to the Storage Area Manager documentation to
properly link Command View to Storage Area Manager. Additional information about SSL configuration is
available under the Support tab in Command View.
Integrating with miscellaneous management applications
The latest HP StorageWorks Command View integration information is available under the Support tab in
Command View.
Table 14 Command View host agent compatibility with Storage Area Manager host agents
Command View version Storage Area Manager version
2.0 or 2.1 3.2
1.8B 3.1
1.8A 3.1
1.7B 3.0 with patch SANMGR_00010
1.60.00 or 1.7A 3.0
1.51.00, 1.52.00, or 1.53.00 2.2, 2.2.1 with patch SANMGR_00006, or
2.2 with patch SANMGR_00007
1.40.04 2.2
1.40.01 or 1.30.00 2.1