Installation guide

40 Installation
2. Click Add Multiple Hosts. A dialog box displays a table.
3. In the table, enter the host name or IP address, admin user name, and password in their respective
columns.
4. Click Add All Hosts Now.
Installing the host agents
1. The Managed Host list should now contain all the hosts previously added. From this list, select the hosts
to which you want to deploy a host agent.
2. Re-authenticate the selected hosts by right-clicking and selecting Re-authenticate from the menu.
3. If Performance Advisor XP 2.1 or Storage Area Manager 3.2 host agents are already installed on a
host, enable the Command View XP management station to access the host by selecting Start >
Programs > HP StorageWorks > Host Agent Deployment Tools > Update Host Agent Access, and then
selecting Set IP for each host and updating access for each host.
4. Click Install on Selected Hosts.
Uninstalling the host agents with the remote deployment tool
NOTE: The remote deployment tool uninstalls Command View XP Path Connectivity and Performance
Advisor XP host agents if both are installed on the same host.
NOTE: If the Storage Area Manger 3.2 host agent is also installed on the host, uninstall the Command
View XP Path Connectivity host agent prior to uninstalling the Storage Area Manager host agent.
Uninstalling the Storage Area Manager host agent first may result in uninstallation of some Command
View XP Path Connectivity components.
1. Launch the remote deployment application by selecting Start > Programs > HP StorageWorks > Host
Agent Deployment Tools > Uninstall Host Agent.
2. Select the hosts you want to remove from the Managed Host list.
If the Managed Host list does not contain the host agent you want to remove, manually add the host
from the Add Single Host box, click Add Host, and then select the host from the Managed Host list.
3. Re-authenticate the selected hosts by right-clicking and selecting Re-authenticate from the menu.
4. Click Uninstall from Selected Hosts.
Updating the host agent access files using the remote deployment tool
By default, only the management station used to install the host agent has access to the host agent. If you
want another management station to access the host, update the host access list by completing the
following procedure.
1. Launch the remote deployment application by selecting Start > Programs > HP StorageWorks > Host
Agent Deployment Tools > Update Host Agent Access File.
2. From the Managed Host list, select the hosts you want to update.
If the Managed Host list does not contain the host you want to update, manually add the host from the
Add Single Host box, click Add Host, and then select the host from the Managed Host list.
3. Select Set IP for each host under the Add-Access Mode column.
4. Select the hosts for which you want to update access, and click Add Access to Selected Hosts.