Installation guide

34 Installation
Certain users may find they need the flexibility of the ALWAYS setting, which ensures that Command
View always determines the timeout value. Using this setting means that Command View checks the
CommandView.properties file every time a user in Modify mode clicks a tab to manage an
XP128/XP1024/XP12000 (Identity and Status tabs excluded). You may want to consider using this
setting if you or someone else needs to change the timeout value on the SVP, but you want to override
that when using Command View. Note that this setting adds an additional delay of approximately 45
seconds when loading a new pane.
If you are managing an XP48/XP512, Command View ignores the ONCE or ALWAYS setting because
the ALWAYS setting is not available.
5. Save and close the file.
6. Restart Command View services by selecting Start > Programs > HP StorageWorks > Restart Services.
Add disk arrays to Command View
1. Start Command View.
2. Log on using administrator as the user ID and administrator as the password.
3. Click the Device Administration tab.
4. Enter the disk array’s IP address in the Agent IP Address field. A Hewlett-Packard customer engineer
can provide you with this IP address once the array’s SVP is installed.
5. Press Enter or click Submit.
The Serial Number, Product Type, and Product Number fields are filled in automatically.
6. If the Device Name field is blank, enter a name for the disk array.
7. For an XP1024, click the left DKU type and right DKU type from the drop-down lists.
8. If the Contact and Location fields are blank, enter a contact name and a location.
9. Select the Manage Array check box to enable extended features of Command View as described in
Table 12. Generally, if you want to use any feature besides the GUI for XP128/1024/XP12000, you
should select Manage Array.
10.Click Save and then click OK to confirm. Repeat the previous steps to add more disk arrays.
Install license keys
If you need to install any license keys that enable disk array product features such as Business Copy or
Continuous Access, use the License Key Management (Install) pane in Command View to install them. For
more information about license keys, refer to the HP StorageWorks Command View XP user guide.
1. Start Command View.
2. Log in, using administrator as the user ID and administrator as the password.
Table 12 Extended features
SMI-S (All
array models)
Event
Notification
(All array
models)
CV CLI (All
array models)
XP48, XP512
GUI
XP128,
XP1240 &
XP12000 GUI
Managed
Array Selected
Functional Functional Functional Functional Functional
Unmanaged
Array Selected
Nonfunctional Nonfunctional Nonfunctional Nonfunctional Functional