Installation guide

24 Installation
c. Click Next.
d. Select the operating systems that your hosts are running in the Choose Host Agent Platforms
window, and click Next.
e. The setup program transfers and/or removes application files to and from the destination folder,
and configures Command View. When complete, click Finish.
7. To repair Command View:
a. Click Repair and click Next.
b. The setup program transfers application files to the destination folder and configures Command
View. When complete, click Finish.
Uninstall Command View
Complete the following instructions only if you need to uninstall Command View.
1. From the Control Panel in Windows, click Add/Remove Programs.
2. Select HP StorageWorks Command View XP.
3. Click Change.
4. Click Next.
5. Select Remove and click Next.
6. Click Remove.
7. Click Finish. A message appears indicating that uninstallation was successful.
8. Reboot the management station to ensure the Command View XP services are completely removed.
Verify Command View services
Verify that all the necessary Command View services are running. To view the services, from the Control
Panel in Windows, click Administrative Tools > Services.
NOTE: If you have elected not to install the Hpss Apache server (you installed the Apache Secure Socket
Layer (SSL) server instead), the setup program will continue to install and configure the Hpss Apache files
and service, but will not start the Hpss Apache service. For further instructions about installing an
SSL-enabled (non-Hpss) Apache server, refer to the document hpss_apache_whitepaper.pdf located
in the root directory of the Command View CD or under the Support tab in Command View.
Table 9 shows the services you need to verify.
Table 9 Command View services
Component Service name Process name(s)
Apache Web Server HpssApache apache.exe
Command View Trap
Distributor
HpssCVTrapDistributor JWrapper_CVTrapdistributor.exe
HpssCVTrapdistributor.exe
Solid Database HpssDb solid.exe
Command View
Management Server
HpssCVManagementServer JWrapper_CVManagementserver.exe
HpssCVManagementserver.exe