Installation guide

Command View XP installation guide 21
Alternate firewall case 2: Firewall running on SVP
Assuming that all SVP outbound traffic is unrestricted by the SVP’s firewall, configure the ports listed in
Table 6.
Using multiple LAN cards
If you have multiple LAN cards installed in the Command View management station, you must:
• Configure the first LAN card to communicate with the hosts and Command View API clients on the
SAN.
• Modify the SERVER_HOST parameter in the APIServer.cfg file to point to the first LAN card. This
file is located at <install_root>\hpss\dm\tomcat\webapps\hpstmgmt\WEB-INF\cvapi\
config.
To set the LAN card as the first network card, modify the bindings order of the network adapters to bind
that network card first. To modify the connection bindings order, you must be logged on as a member of
the Administrators group.
Modifying the connection bindings order on Windows 2000, Windows Server
2003, or Windows XP
1. Open the Network and Dial-up Connections window by right-clicking the My Network Places icon on
the desktop and then choosing Properties.
2. From the Advanced menu, select Advanced Settings.
3. Select the connection you want to move, and then click the up or down arrow to change the order.
4. Click OK to save your changes.
Verify the host system name
The host system name should not contain spaces or non-alphanumeric characters.
XP128/XP1024/
XP12000/XP48/
XP512
Port 443
inbound
TCP Used for Command View web
clients, CLI clients, and the
Command View management
station if it is used as a web or
CLI client when the Command
View management station is
configured for SSL
XP128/XP1024/
XP12000/XP48/
XP512
Port 5988
inbound
TCP Used by SMI-S clients
XP128/XP1024/
XP12000/XP48/
XP512
Port 5989
inbound
TCP Used by SMI-S clients that use
HTTPS/WEBM
XP128/XP1024/
XP12000/XP48/
XP512
Port 161
inbound
UDP
Used for incoming SNMP traffic
from HP Enterprise Integrations
SNMP clients
XP128/XP1024/
XP12000/XP48/
XP512
Port 162
inbound
UDP Used for incoming SNMP traps
from the SVP
Table 8 Ports to be opened for a firewall on the Command View management station (continued)