Installation guide

18 Installation
Verify Command Line Interface (CLI) requirements
If you are installing the Command View Command Line Interface (CLI) and/or Path Connectivity
Command Line Interface (CLI), verify the minimum requirements are met:
• The CLI client version of Command View must be the same as the version installed on the Command
View management station.
• Be sure that JRE 1.4.2 (Windows) or JRE/RTE 1.4.2.05 (HP-UX) is installed on the client platform (the
system from which you run the CLI). Other operating systems or JRE versions are not supported.
• The CLI client platform must have network connectivity to the Command View management station.
• To run the CLI from a telnet session using a command prompt window, use a command prompt window
that supports the X Windows function, such as Reflection X, or use the command line login method,
such as e2ecli -p user/user.
Solaris 9 LP9002L
LP9802DC
5.01e-1 (SNIA 1.6a) Emulex
FCE-6410
FCE2-6410
FCE2-6412
4.1.3 (SNIA 2.0),
4.1.5 (SNIA 2.0)
JNI
FCI-1063
FC64-1063
2.5.18 (w/ SNIA 1.0 lib) JNI
FCE-1063
FCE2-1063
4.1.3 (w/ SNIA 2.0 lib) JNI
FCE-1473 5.1.1 (w/ SNIA 2.0 lib) JNI
FCE-6460 (2 GB)
FCE2-6560 (2 GB)
FCX-6562 (2 GB)
FCX2-6562 (2 GB)
FCC-6460 (2 GB)
FCC2-6560 (2 GB)
5.1.1 (SNIA 2.0),
5.2.1 (SNIA 2.0),
5.3.0.1 (SNIA 2.0)
JNI
QLA2340
QLA2342
4.08 (SNIA 2.02) QLogic
X6799A
X6767A
11.8.0 Sun
AIX 5.1 IBM 6228 V5.1.0.15 IBM
AIX 5.2 IBM 6228 V5.2.0.10 IBM
IBM 6239 V5.2.0.10 IBM
Table 5 Path Connectivity HBA support (continued)
OS HBA model HBA driver HBA vendor