Technical data

The following host group modes are available for Tru64:

Host

Group

Mode Function Default Comments

Enable use of Continuous Access on Tru64

TruClusters.

Inactive

Previously MODE272

CAUTION:

Changing host gr oup modes for ports where servers are already installed and conﬁ gured is disruptive

and requires the server to be rebooted.

Setting the System Option Modes

The HP service representative sets the System Op tion Mode(s) based on the operating system and

software conﬁguration of the host.

Conﬁguring the Fibre Channel ports

Conﬁgure the disk array Fibre Channel ports by using Remote Web Console (shown) , Command View, or

Command View XP AE. Select the settings for each port based on your storage area network topology.

Use switch zoning if you connect different types of hosts to the array through the same switch. For

detailed procedures, refer to HP StorageWorks LUN Conﬁguration and Security Manager XP user guide

available at h

ttp://www.hp.com/support/manuals.

Fibre address

In fabric environments, the port addresses are assigned automatically.

HP StorageWorks Disk Array XP operating system conﬁguration guide: Tru64 UNIX