Technical data

UltraSCSI BA356, 10–14
termination resistors
KZPBA-CB
, 4–9t, 4–17, 9–5t,
9–7t
KZPSA-BB, 9–5t, 9–7t
terminators supported
, 2–16
TL881 tape library, 8–58
TL881/891 DLT MiniLibrary
cabling
, 8–64, 8–67
capacity, 8–58, 8–60
components, 8–59
configuring base unit as slave
, 8–70
models, 8–58
performance, 8–60
powering up, 8–71
setting the SCSI ID
, 8–62, 8–72
TL890 tape library
cabling
, 8–31
default SCSI IDs
, 8–37
powering up
, 8–36
setting SCSI ID
, 8–36
TL891 tape library
, 8–24, 8–58
cabling, 8–26, 8–31
configuring as slave, 8–34
default SCSI IDs, 8–26, 8–37
setting SCSI ID
, 8–24, 8–25, 8–36
shared SCSI usage
, 8–24
TL892 tape library, 8–24
cabling, 8–26, 8–31
configuring as slave, 8–34
default SCSI IDs, 8–26, 8–37
setting SCSI ID
, 8–24, 8–25, 8–36
shared SCSI usage
, 8–24
TL893 tape library, 8–50
cabling, 8–53, 8–56
MUC switch functions, 8–51
setting SCSI ID, 8–52
TL894 tape library
cabling
, 8–42
setting SCSI ID, 8–38
TL895 tape library
cabling
, 8–49
default SCSI IDs
, 8–45
setting SCSI ID
, 8–45
TL896 tape library, 8–50
cabling, 8–53, 8–56
MUC switch functions
, 8–51
setting SCSI ID
, 8–52
transparent failover
, 1–15, 3–17
changing to multiple-bus failover
,
6–77
example configuration, 6–9
trilink connectors
connecting devices with
, 10–6
requirement, 2–16
supported, 2–16
TZ885 minilibrary
, 8–18
cabling, 8–19
setting SCSI ID, 8–18
TZ887 minilibrary, 8–21
cabling, 8–22
setting SCSI ID, 8–21
TZ88N-TA tabletop tape drive
, 8–2
cabling, 8–6
setting SCSI ID
, 8–6
TZ88N-VA SBB tape drive
, 8–2
cabling, 8–4
setting SCSI ID
, 8–2
TZ89 tape drive
, 8–7
U
UltraSCSI BA356
disable termination
, 10–17
DS-BA35X-DA personality module,
3–3
DS-DWZZH-03 installed in
, 2–13,
3–10, 4–7, 9–3, 10–34
DS-DWZZH-05 installed in, 2–13,
3–10, 3–11, 4–7, 9–3, 10–34
fast narrow SCSI drives, 3–3
fast wide SCSI drives, 3–3
jumper, 10–14
Index–13