Technical data

I
I/O buses
number of
, 2–6
I/O risers
cables
, 7–3, 7–9
local, 7–3, 7–9
remote, 7–3, 7–9
init command, 6–37, 6–65, 6–68,
6–73, 6–76
initialize
after setting bootdef_dev console
environment variable
, 6–68,
6–73, 6–76
after using wwidmgr, 6–37, 6–65
installation, 3–16
(
See also hardware
configuration )
hub, 6–34
KGPSA, 6–36
KZPBA-CB, 4–6t, 9–2t
KZPSA-BB, 9–2t, 9–4
MC2, 5–10
MC2 cables, 5–9
Memory Channel, 5–6
Memory Channel cables, 5–7
Memory Channel hub, 5–7
optical converter, 5–6
optical converter cables
, 5–10
switch, 6–26
internal cabling
ESL9326D enterprise library
, 8–76
TL893 tape library, 8–53
TL896 tape library, 8–53
J
jumpers
MC1 and MC1.5 (CCMAA)
, 5–2
MC2 (CCMAB), 5–4
MC2 (CCMLB), 5–5
K
KGPSA Fibre Channel host bus
adapter
GLM
, 6–36
installing, 6–36
mounting bracket, 6–36
obtaining the worldwide name of
,
6–41
setting to run on a loop
, 6–39
setting to run on fabric
, 6–37
KZPBA-CB UltraSCSI host bus
adapter
displaying device information
,
4–9t, 4–16, 9–6t, 9–7t
restrictions, 2–10
setting SCSI ID
, 4–17
termination resistors, 4–9t, 4–17,
9–5t, 9–7t
using in cluster, 4–6, 9–2
KZPSA-BB SCSI bus adapter
displaying device information
,
9–6t, 9–7t
installation, 9–4
restrictions, 2–9
setting bus speed
, 9–17
setting SCSI ID
, 9–17
setting termination power
, 9–17
termination resistors
, 9–5t, 9–7t
updating firmware, 9–18
using in cluster, 9–2
L
Legato Networker, 2–9
LFU, 9–18
booting, 9–18
updating firmware, 9–18
updating firmware with, 9–18
link cable
installation
, 5–7
Loadable Firmware Update utility
Index–7