Technical data

FCP, 6–2
ffauto console environment
variable
, 6–73
ffnext console environment
variable
, 6–73
fiber-optic cable
Fibre Channel
, 2–8, 6–27
Memory Channel, 2–5, 5–6, 5–7,
5–9, 5–11
Fibre Channel
AL_PA arbitrated loop physical
address
, 6–3
arbitrated loop, 6–3, 6–6
configurations supported, 6–8,
6–10, 6–17
data rates, 6–2
distance, 6–2
F_Port fabric port, 6–4
fabric, 6–3, 6–5
FL_Port fabric loop port
, 6–4
frame, 6–3
hub installation, 6–34
N_Port node port, 6–3
NL_Port node loop port
, 6–3
point-to-point, 6–5
restrictions, 2–6, 2–7
supported switches, 2–8
switch installation
, 6–26
table of known connections, 6–77
terminology, 6–2
topology, 6–4, 6–83, 6–85
Fibre Channel Protocol
(
See FCP )
Fibre Channel tape controller
,
2–9
Fibre Channel tape controller II,
2–9
file
sysconfigtab
, 5–18
/var/adm/messages, 6–41
firmware
35/70 DLT tape drives
, 8–75
ESL9326D enterprise library
, 8–75
fail-safe loader, 7–18
KZPBA-CB, 2–10, 4–7, 7–13, 9–5
KZPSA-BB, 2–9, 9–5t, 9–18
release notes
, 4–4
reset system for update
, 7–21,
9–19
SRM console, 4–7t, 7–4, 9–5t,
9–18
SROM, 7–18
TL894 tape library
, 8–38
TL895 tape library, 8–45
update CD-ROM
, 4–4
updating, 9–18
updating GS80/160/320, 7–18
FL_Port fabric loop port
, 6–4
G
GBIC
GBIC-LW
, 2–8, 6–27
GBIC-SW, 2–8, 6–27, 6–37
Gigabit Interface Converter
( See GBIC )
Gigabit Link Module
( See GLM )
GLM, 2–8
H
hard partition
defined
, 7–1
repartitioning, 7–8
requirements, 7–2
hardware components
Fibre Channel
, 2–6
SCSI adapters, 2–6
SCSI cables, 2–14
SCSI signal converters, 2–12
storage shelves, 10–9
terminators, 2–16
Index–5