Technical data

7. Prepare the UltraSCSI BA356 for TruCluster Server use (see
Section 10.4.1.3). Ensure that you have installed an H8861-AA VHDCI
trilink connector on the UltraSCSI BA356 personality module.
____________________ Note _____________________
If you need more storage than one UltraSCSI BA356
provides, you can daisy-chain two of them together. See
Section 10.4.3.3 for more information.
8. Select one KZPBA-CB host bus adapter on each system. Connect a
BN38C, BN38D, or a combination of a BN38E-0B technology adapter
cable and a BN37A cable between the open leg of the BN21W-0B Y
cable on each system to the H8861-AA VHDCI trilink connector on the
UltraSCSI BA356 personality module. This creates the shared SCSI
bus between member systems 1 and 2.
The remaining KZPBA-CB on each system has an open leg on its
BN21W-0B Y cable. These connections will be used for the other shared
SCSI buses.
Configuring an Eight-Member Cluster Using Externally Terminated
Shared SCSI Buses 11–7