Technical data

Table 8–21: Shared SCSI Bus Cable and Terminator Connections for the
ESL9326D Enterprise Library
Tape Drives on Shared
SCSI Bus
Connect SCSI Cable
to Connector
Install HD68 Terminator
on Connector
0, 1, and library electronics
a
QB
2, 3
CD
4, 5
EF
6, 7
GH
8, 9
IJ
10, 11
KL
12, 13
MN
14, 15
OP
a
Install 30-centimeter (11.8-inch) jumper cable part number 330582-001 between SCSI connectors R and A
to place the library electronics on the SCSI bus with tape drives 0 and 1.
______________________ Notes ______________________
Each ESL9326D Enterprise Library arrives with one 330563-001
HD68 terminator for each pair of tape drives (one SCSI bus). The
kit also includes at least one 330582-001 jumper cable to connect
the library electronics to tape drives 0 and 1.
Tape libraries with more than six tape drives include extra
330582-01 jumper cables in case you do not have enough host bus
adapters and you want to place more than two tape drives on a
single SCSI bus (a configuration that we do not recommend).
8–78 Configuring a Shared SCSI Bus for Tape Drive Use