Technical data

8.13.3.3 ESL9326D Enterprise Library Internal Cabling
The default internal cabling for the ESL9326D Enterprise Library is to place
two 35/70 DLT tape drives on one SCSI bus.
Figure 8–20 shows the default cabling for an ESL9326D Enterprise Library
with 16 tape drives. Each pair of tape drives is cabled together internally to
place two drives on a single SCSI bus. If your model has fewer drives, all
internal cabling is supplied. The terminators for the drives that are not
present are not installed on the SCSI bulkhead.
Figure 8–20: ESL9326D Internal Cabling
T
Tape Drive 0
Tape Drive 1
Tape Drive 2
Tape Drive 3
Tape Drive 4
Tape Drive 5
Tape Drive 6
Tape Drive 7
Tape Drive 8
Tape Drive 9
Tape Drive 10
Tape Drive 11
Tape Drive 12
Tape Drive 13
Tape Drive 14
Tape Drive 15
Robotics
T T TTTTT
ABCDEFGHPONML KJ I
Q R
SCSI
Bus In
SCSI ID 2
SCSI ID 3
SCSI ID 4
SCSI ID 5
SCSI ID 0
SCSI ID 2
SCSI ID 2
SCSI ID 2
SCSI ID 3
SCSI ID 3
SCSI ID 3
SCSI ID 5
SCSI ID 5
SCSI ID 5
SCSI ID 4
SCSI ID 4 SCSI ID 4
SCSI Bulkhead
ZK-1705U-AI
8–76 Configuring a Shared SCSI Bus for Tape Drive Use