Technical data

4. Install an HD68 differential (H879-AA) terminator on the right DLT1
connector (the fourth connector from the left) and install another HD68
differential terminator on the right DLT2 connector (the rightmost
connector).
Figure 8–18 shows an example of a TruCluster configuration with a TL891
standalone MiniLibrary connected to two shared SCSI buses.
Figure 8–18: TL891 Standalone Cluster Configuration
KZPBA-CB (ID 7)
Memory
Channel
Interface
Memory Channel
KZPBA-CB (ID 6)
Memory Channel
Member
System
2
Member
System
1
DS-DWZZH-03
T
T
T
2
1
4
1
3
StorageWorks
RAID Array 7000
HSZ70HSZ70
Controller B Controller A
T
KZPBA-CB (ID 7)
5 5
6
7
KZPBA-CB (ID 6)
T
T
Network
T
Library
Robotics
Expansion
Unit
Interface
DLT1
TL891
DLT2
0.3 m
SCSI Bus
Jumper
6
7
ZK-1627U-AI
Table 8–19 lists the components that are used to create the cluster that is
shown in Figure 8–18.
8–66 Configuring a Shared SCSI Bus for Tape Drive Use