Technical data

Chapter 3 Contains information about setting up a shared SCSI bus, SCSI

bus requirements, and how to connect storage to a shared SCSI bus

using the latest UltraSCSI products (DS-DWZZH UltraSCSI hubs,

and HSZ70 and HSZ80 RAID array controllers).

Chapter 4 Describes how to prepare systems for a TruCluster Server

configuration, and how to connect host bus adapters to shared

storage using the DS-DWZZH UltraSCSI hubs and the HSZ70

and HSZ80 RAID array controllers.

Chapter 5 Describes how to set up the Memory Channel cluster interconnect,

and how to upgrade Memory Channel interconnects.

Chapter 6 Provides an overview of Fibre Channel and describes how

to set up Fibre Channel hardware.

Chapter 7

Describes the use of AlphaServer™ GS80, GS160, or GS320 hardware

partitions in a TruCluster Server configuration.

Chapter 8 Describes how to configure a shared SCSI bus for tape drive,

tape loader, or tape library usage.

Chapter 9 Describes how to prepare systems and host bus adapters for the

TruCluster Server configurations described in Chapter 10.

Chapter 10 Describes the requirements for a shared SCSI bus using externally

terminated configurations and radial configurations using

non-UltraSCSI RAID array controllers.

Chapter 11 Describes how to configure an externally terminated eight-node cluster.

Appendix A Provides a blank table to use to convert from the HSG80 unit

numbers to

/dev/disk/dskn and device names for an actual

Fibre Channel TruCluster Server configuration.