Technical data

2–1
PCI Backplane Slot Layout .... ..... .... .
............................
2–3
3–1
VHDCI Trilink Connector (H8861-AA) ............................
3–8
3–2
DS-DWZZH-03 Front View .... ..... .... .............................
3–10
3–3
DS-DWZZH-05 Rear View . ... . ... ..... ..
............................
3–14
3–4
DS-DWZZH-05 Front View .... ..... .... .............................
3–15
3–5
Shared SCSI Bus with HSZ70 Configured for Transparent
Failover .... .............................................................
3–21
3–6
Shared SCSI Bus with HSZ80 Configured for Transparent
Failover .... .............................................................
3–22
3–7
TruCluster Server Configuration with HSZ70 in Multiple-Bus
Failover Mode .........................................................
3–25
3–8
TruCluster Server Configuration with HSZ80 in Multiple-Bus
Failover Mode .........................................................
3–26
3–9
TruCluster Server Configuration with an RA3000 Controller
Shelf with Active/Passive Failover .... ............................. 3–29
3–10
TruCluster Server Configuration with an RA3000 Pedestal
with Active/Passive Failover and a DWZZH-05 UltraSCSI
Hub ......................................................................
3–30
3–11
TruCluster Server Configuration with an RA3000 Pedestal
with Active/Active or Active/Passive Failover ... ................. 3–31
3–12
TruCluster Server Configuration with an RA3000 Controller
Shelf with Active/Active or Active/Passive Failover . ..... .... ... 3–32
4–1
KZPBA-CB Termination Resistors .... ............................. 4–18
5–1
Connecting Memory Channel Adapters to Hubs ................. 5–9
5–2
MC1-to-MC2 Virtual Hub Upgrade ................................ 5–20
5–3
MC1-to-MC2 Standard Hub Upgrade: Initial Configuration .. 5–21
5–4
MC1-to-MC2 Standard Hub Upgrade: First MC1 Module
Replaced ..... ........................................................... 5–22
5–5
MC1-to-MC2 Standard Hub Upgrade: Replace First MC1
Adapter in Second System .... ... .... ................................ 5–23
5–6
MC1-to-MC2 Standard Hub Upgrade: Replace Third System
Memory Channel Adapters ...... .... ................................ 5–24
5–7
MC1-to-MC2 Standard Hub Upgrade: Replace Second MC1 in
Second System . .... ... ................................................ 5–25
5–8
MC1-to-MC2 Standard Hub Upgrade: Final Configuration ... 5–26
6–1
Point-to-Point Topology .............................................. 6–5
6–2
Fabric Topology .... .... ... ............................................. 6–6
6–3
Arbitrated Loop Topology ............................................ 6–7
6–4
Fibre Channel Single Switch Transparent Failover
Configuration ......................................................... 6–9
6–5
Arbitrated Loop Configuration with One Storage Array .... ... 6–10
6–6
Multiple-Bus NSPOF Configuration Number 1 .. ................ 6–12
6–7
Multiple-Bus NSPOF Configuration Number 2 .. ................ 6–13
xiv Contents