Technical data

6–4
Displaying the UDID and Worldwide Names of Devices Known
to the Console .........................................................
6–62
6–5
Setting the Device Unit Number with the wwidmgr quickset
Command .... ..........................................................
6–64
6–6
Sample Fibre Channel Device Names .............................
6–67
6–7
Setting Device Unit Number for Additional Member System . 6–74
7–1
Defining Hard Partitions with SCM Environment Variables . . 7–10
7–2
Turning Partition Power On .. ..... .... ............................. 7–12
7–3
Displaying AlphaServer GS160 System Information . ... . ... ... 7–14
7–4
Displaying Console Serial Bus Information .. .... ................ 7–16
9–1
Displaying Configuration on an AlphaServer 4100 . ... . ... ..... . 9–9
9–2
Displaying Devices on an AlphaServer 4100 .... ................. 9–10
9–3
Displaying Configuration on an AlphaServer 8200 . ... . ... ..... . 9–11
9–4
Displaying Devices on an AlphaServer 8200 .... ................. 9–12
9–5
Displaying the pk* Console Environment Variables on an
AlphaServer 4100 System .. ..... .... ................................ 9–13
9–6
Displaying Console Variables for a KZPBA-CB on an
AlphaServer 8x00 System . .... ..... .... ............................. 9–15
9–7
Displaying Console Variables for a KZPSA-BB on an
AlphaServer 8x00 System . .... ..... .... ............................. 9–15
9–8
Setting the KZPBA-CB SCSI Bus ID .............................. 9–16
9–9
Setting KZPSA-BB SCSI Bus ID and Speed ... ................... 9–17
Figures
1–1
Two-Node Cluster with Minimum Disk Configuration and No
Quorum Disk .......................................................... 1–6
1–2
Generic Two-Node Cluster with Minimum Disk Configuration
and Quorum Disk .. ..... .............................................. 1–7
1–3
Minimum Two-Node Cluster with UltraSCSI BA356 Storage
Unit . .... ..... ........................................................... 1–9
1–4
Two-Node Cluster with Two UltraSCSI DS-BA356 Storage
Units . ..... .... .......................................................... 1–12
1–5
Two-Node Configurations with UltraSCSI BA356 Storage
Units and Dual SCSI Buses .. .... ... ................................ 1–13
1–6
Cluster Configuration with HSZ70 Controllers in Transparent
Failover Mode ......................................................... 1–14
1–7
NSPOF Cluster Using HSZ70s in Multiple-Bus Failover
Mode . ..... ... ........................................................... 1–16
1–8
NSPOF Fibre Channel Cluster Using HSG80s in Multiple-Bus
Failover Mode ......................................................... 1–17
1–9
NSPOF Cluster Using LSM and UltraSCSI BA356s .. .... ... ... 1–19
Contents xiii