Technical data

8.12.2
Preparing a TL881 or TL891 MiniLibrary for Shared SCSI
Bus Use ............................................................
8–61
8.12.2.1
Preparing a Tabletop Model or Base Unit for
Standalone Shared SCSI Bus Usage .. ................... 8–62
8.12.2.1.1
Setting the Standalone MiniLibrary Tape Drive
SCSI ID .... ..............................................
8–62
8.12.2.1.2
Cabling the TL881 or TL891 DLT MiniLibrary .... 8–64
8.12.2.2
Preparing a TL881 or TL891 Rackmount MiniLibrary
for Shared SCSI Bus Usage .. .............................. 8–67
8.12.2.2.1
Cabling the Rackmount TL881 or TL891 DLT
MiniLibrary .............................................
8–67
8.12.2.2.2
Configuring a Base Unit as a Slave to the
Expansion Unit ..... ... . ... ............................. 8–70
8.12.2.2.3
Powering Up the TL881/TL891 DLT MiniLibrary . 8–71
8.12.2.2.4
Setting the SCSI IDs for a Rackmount TL881 or
TL891 DLT MiniLibrary .. ............................. 8–72
8.13
Compaq ESL9326D Enterprise Library . ... .... ................... 8–73
8.13.1
General Overview ... .............................................
8–73
8.13.2
ESL9326D Enterprise Library Overview .. ................... 8–74
8.13.3
Preparing the ESL9326D Enterprise Library for Shared
SCSI Bus Usage .. ... .............................................
8–75
8.13.3.1
ESL9326D Enterprise Library Robotic and Tape Drive
Required Firmware .. .... ... ................................ 8–75
8.13.3.2
Library Electronics and Tape Drive SCSI IDs .... ..... . 8–75
8.13.3.3
ESL9326D Enterprise Library Internal Cabling ... .... 8–76
8.13.3.4
Connecting the ESL9326D Enterprise Library to the
Shared SCSI Bus ............................................ 8–77
9 Configuring Systems for External Termination or Radial
Connections to Non-UltraSCSI Devices
9.1
TruCluster Server Hardware Installation Using PCI SCSI
Adapters ... .. ........................................................... 9–1
9.1.1
Radial Installation of a KZPSA-BB or KZPBA-CB Using
Internal Termination ............................................ 9–3
9.1.2
Installing a KZPSA-BB or KZPBA-CB Using External
Termination . ..... ... .............................................. 9–6
9.1.3
Displaying KZPSA-BB and KZPBA-CB Adapters with the
show Console Commands .... ..... .............................. 9–9
9.1.4
Displaying Console Environment Variables and Setting
the KZPSA-BB and KZPBA-CB SCSI ID .. ................... 9–13
9.1.4.1
Displaying KZPSA-BB and KZPBA-CB pk* or isp*
Console Environment Variables . .... ..... ................. 9–13
x Contents