User guide

Table Of Contents
Operating System Specific Information
27Modular SAN Array 1000 User Guide
Supported Host Bus Adapters
FCA2214 Host Bus Adapter
Specific Configuration Needs
Before connecting the MSA1000 to the server, install the FCA2214 HBA driver
on the server to prepare the server for the MSA1000.
For instructions, see the Linux section in the Modular SAN Array 1000 Quick
Installation Guide. This guide is included in the Modular SAN Array 1000 Setup
and Management kit.
Novell NetWare Environments
Novell NetWare supports up to six nodes in a cluster using single paths. Complete
redundancy with multiple clusters on the same SAN is possible.
When configuring the storage on the MSA1000, two methods are available: the
CLI is available online, and the ACU can be run from the MSA1000 Support
Software CD.
Supported Operating Systems
NetWare 5.1
NetWare 6.0
Note: For a current listing of the supported operating system versions, see the
MSA1000 website
www.hp.com/go/msa1000
.
230941-005_MSA1000_UG.book Page 27 Thursday, April 17, 2003 5:53 PM