User guide

Table Of Contents
Command Line Interface (CLI)
143Modular SAN Array 1000 User Guide
Example CLI Response
The following display is a continuation of the previous example, creating three
LUNs on the same group of physical drives.
CLI> ADD UNIT 1 DATA=”DISK111-DISK114” RAID_LEVEL=5
STRIPE_SIZE=32 SIZE=1000MB
First volume to be configured on these drives.
The logical unit size has been adjusted by 4MB for optimal
performance.
Logical Unit size = 996 MB
RAID overhead = 498 MB
Total space occupied by new unit = 1494 MB
Free space left on this volume = 24533 MB
Unit 1 is created successfully.
CLI> ADD UNIT 2 DATA=”DISK111-DISK114” RAID_LEVEL=5
STRIPE_SIZE=32 SIZE=2000MB
Logical Unit size = 2000 MB
RAID overhead = 1000 MB
Total space occupied by new unit = 3000 MB
Free space left on this volume = 21533 MB
Unit 2 is created successfully.
CLI> ADD UNIT 3 DATA=”DISK111-DISK114” RAID_LEVEL=5
STRIPE_SIZE=16 SIZE=4000MB
Logical Unit size = 4000 MB
RAID overhead = 2000 MB
Total space occupied by new unit = 6000 MB
Free space left on this volume = 15533 MB
Unit 3 is created successfully.
230941-005_MSA1000_UG.book Page 143 Thursday, April 17, 2003 5:53 PM