User guide

Table Of Contents
117Modular SAN Array 1000 User Guide
6
Command Line Interface (CLI)
The Command Line Interface (CLI) is used to configure and manage the
MSA1000. In addition, the CLI can be used to display system setup information
and status. It may also provide information on devices that are attached to the
controller.
Note: The CLI is available for all supported operating systems.
The CLI is accessed through a host computer connected to the serial port of the
MSA1000.
Some CLI configuration and management tasks include configuring storage units
(LUNs), setting the addressing mode, limiting access to storage, and viewing
information on MSA1000 components (controller, unit, and cache).
This chapter discusses:
CLI Overview, page 118
CLI Setup, page 121
Help Commands, page 124
Display Commands, page 127
Array Controller Configuration Commands, page 134
LUN Management Commands, page 137
Server Connection Commands, page 152
Selective Storage Presentation/Access Control List Commands, page 156
230941-005_MSA1000_UG.book Page 117 Thursday, April 17, 2003 5:53 PM