System information

84
Get Complete Collection of HP2-T26 Exam's Question and Answers.
http://www.Test4Prep.com
Question: 202
What is required to recover from a failed Onboard Administrator (OA) firmware upgrade? (Select
three.)
A. OA firmware in a .bin file
B. keyboard and monitor attached to the KVM port of OA
C. a DHCP and FTP server accessible by OA
D. a bootable USB key with the latest OA firmware
E. local access to the enclosure
Answer: B, D, E
Question: 203
What can be used to reboot the Active or Standby Onboard Administrator (OA) module?
A. ASR implemented on the OA level
B. enclosure link-down port
C. enclosure Reset button at the rear of the enclosure
D. Insight Display
Answer: C
Question: 204
Which port must be used to connect to the Onboard Administrator (OA) using Service IP?
A. any port of the interconnect in bay 1
B. USB port on active OA
C. standby OA network port
D. enclosure link-up port
Answer: D
Question: 205
A customer installed sixteen server blades and two GbE2c switches in a c7000 enclosure. The
customer reports that none of the servers have a LAN connection. How you can solve this problem?
A. Enable iSCSI and RDMA options for embedded multifunction NIC cards.
B. Verify GbE2c switches are installed into bays 1 and 2.
C. Replace GbE2c switches with the Flex-10 10 Gb Ethernet module to manage all LAN interfaces.
D. Install two additional LAN GbE2c switches into bays 5 and 6 to cover all LAN interfaces.
Answer: B